Portable Emergency Lighting System with METAL HALIDE LAMP model SB 999

DESCRIPTION AND TECHNICAL SPECIFICATIONS

• Base Frame: It consists of SS-304 Tube frame and a base plate of SS sheet of 16ww +10%/ ‐5% thicknesses to support generating set and control gear box and is provided with anti‐vibration rubber pads.SS- no rust
• Top Cover: Made of moulded fibre glass material designed to fasten the tower balloon by suitable steel strip so that there is no leakage at the joint. It shall be provided with suitable nipple for filling air into the balloon and provide support for it to remain erect at wind speed of 40 to 45km/hr.
• Generator set: Recoil start portable AC Generating Set comprising AC Generator, rated as 1200VA 240V single phase of unit power factor and petrol run air cooled four stroke single cylinder engine with resettable circuit breaker in the AC output. Fuel tank of 8 ltrs. capacity for continuous running of generating set for 8 to 10 hours. A fuel level indicator is provided on the display panel.
• System works on 220/240 V 50HZ AC supply and for connecting to the mains and shall have provision for 15 Amp 3 Pin socket and a suitable lead wires at both ends.
• Single Compressor / Blower of Voltage : 235 / 115 V, Air Volume Capacity 1.5m3/min Watts input : 350 Watts, No load speed : 308 is provided to inflate the balloon in 15 secs
• Balloon: It is cylindrical shape made of suitable polyester based cloth to ensure emission of light with minimum loss and shall be water proof and strengthened with flexible stiffeners to sustain inside air pressure and to remain erect against outside wind speed of 40 to 45 Km/Hr.
• One 400W high pressure metal Halide(HPMH) lamp to give 40000 to 42000 lumens is mounted inside the balloon at the top end such that it goes up/down while inflating and deflation at a height of 4.5 mtrs. from base plate. The length of nylon rope required for the straps is 5 meters and of 6 mm dia.
• Control gear suitably designed and fitted with MCB, lamp ballast igniters, capacitor, change over and on/off switches with indicating lamps is provided for controlling 1 no 400W HPMH lamp and the air blower.
• Performance Compliance. (a) A minimum lux value of 1 shall be achieved on ground at 55m radius within 5 minutes of starting. (b) deflation time including repacking shall be 5 minutes max. (c) The system continuously runs for 8 hours without damaging / adversely affecting the balloon fabric and other components.
• Over all dimensions: Total weight of complete system: 50Kg max (excluding storage box) Overall dimension in deflated condition (nominal): 600 x450x500mm.